Hot Sales Fiberglass Pultruded Profile Round Pipe FRP Pipe

Model NO.: pipe
Material: Fiberglass
Fiber Type: GFRP
Type: Diphenyl Ether FRP
Connection: Butt Fusion,Flanged Joint
Length: 6m, 10m, 12m
Dimensions: Customizable
Technique: Filament Winding
Trademark: NM
Transport Package: Carton
Specification: 6M, 10M, 12M
Origin: China
HS Code: 3925900000
Model NO.: pipe
Material: Fiberglass
Fiber Type: GFRP
Type: Diphenyl Ether FRP
Connection: Butt Fusion,Flanged Joint
Length: 6m, 10m, 12m
Dimensions: Customizable
Technique: Filament Winding
Trademark: NM
Transport Package: Carton
Specification: 6M, 10M, 12M
Origin: China
HS Code: 3925900000
Product Description

Description:
FRP pipe is in the filament winding process, using quartz sand layer will strengthen, make its have sandwich structure, such as reducing the comprehensive cost of the pipeline, and improve the overall strength and stiffness of the pipeline. 
High pressure FRP pipe is a new type of nonmetallic pipe. In its making, glass roving, soaking by low viscosity but strong adhesive bonding resin,winds around mould at the preset angle and layers. It has to be cured,released from the mould and then processed. Excellent corrosion resistance, high endurance, light weight and high strength are among its special properties

Characteristic: 
- Light weight, high strength, and convenient transportation and installation.
- Excellent corrosion resistant, it can be used under the condition of seawater environment for long time.
- Good low temperature resistant, it can be used under the condition of -45°C-120°C for long time.
- Smooth inner surface, its roughness coefficient is 0.0084, good conveying, and no fouling, no secondary pollution, decrease the cost of the running & maintenance.
- Fire retardant, it meets IMOA.753(18) Level-3 fire resistance class.

Specification:
-Pressure: 0.25Mpa~2.5Mpa
-Temperature:-45°C~120°C
-Length of single pipe: DN<250 ,L=6m ;DN≥12m ;the length can also be made according to the requirement of the user.

Connection way:
Connection way can adopt screw connection, spigot and socket connection, flange connection, plain end butt connection, sleeve connection, etc connection way.
 
Item
Technical index
Inspect standard
Tensile Strength(Ft)
≥120
GB-T1447-1983
Bending strength(Fe)
≥170
GB-T1449-1983
Compressive strength(Fc)
≥102
GB-T1448-1983
Toughness(J)
≥85
GB-T1451-1983
Barcol hardness(H)
≥30
GB-T3854-1983

Working Process
Liner making machine
It is set up with Taida PLC numerical control device. The winding film, mat and girding fabric can be controlled automatically by the tension bracket device which makes the lap joint is smooth and precise, so the artificial nonuniformity and waste phenomenon will be prevented.


Winding machine
The sand-adding method includes many modes: intermediate, bottom, dry, wet and dry-wet method. By being set up with automatic glue-supplying pumping station and mixer, ratio of sand inclusion is fully automatic and well-distributed, so the operation of the equipment is pretty convenient and accurately, low energy-consuming.


Curinging station
Include open style and closed style. It's allocated with infrared heating system and the mould revolves automatically.


Demoulding machine
It adopts hydraulic transmission and the movement is stable. The flexible distance of claw is long and the applying scope of diameter is wide. It saves the usage of mould-extracing loop so the operation is easier.
 
Advantage