With the improvement of the quality of life, choosing a toilet that suits their needs has also become a complicated matter. So, how to choose a toilet ? Is there any trick for toilet purchase? Next, Xiao Bian will give a detailed introduction on how to choose toilets and toilets to choose from. Let's take a look.

How to choose a toilet, a toilet to buy the Raiders full appearance of how to choose?

In order to match with a variety of bathroom decoration style, the appearance of the toilet is also increasingly diversified. According to the different shapes of lines, it can be divided into classical retro style, simple modern style and fashionable avant-garde style. Among them, the retro style is mainly based on exaggerated shapes; the modern style lines are smooth and smooth; while the avant-garde style lines are angular.

Xiao Bian suggestions : If the family is very rich, the overall decoration style is mainly luxury classical, then you can choose the classic retro-style toilet; if the sense of home technology is full, you can choose to shape the toilet avant-garde; if it is simple or other The decoration style, the simple shape of the wild toilet is your best choice!

The toilet is divided into split type and conjoined type, and can be easily identified by observing whether the toilet porcelain body is integrated with the water tank. Porcelain body is integrated with the water tank, which can be more overall, beautiful, and atmospheric, but the cost is less than the cost of the body type; the split type structure is mainly used in American toilets, and the water tank can be made larger, but between the water tank and the porcelain body The gap is easy to filth.

Xiao Bian suggestions : Unless you are particularly fond of American toilets, otherwise we can directly choose a one-piece toilet on it. Whether it is a one-piece type of toilet and the convenience of cleaning the range of choice, are far better than the split type toilet, and one-piece type toilet is not much less expensive than the size of the toilet, so one-piece toilet is preferred!

How to choose the toilet 2, the toilet to buy the Raiders of the toilet how to choose the water?

The toilet seat can be divided into PP material and urea formaldehyde material according to different materials. PP material appeared earlier, the cost is relatively cheap, but the texture is soft, not wear, with the use of time increases, easy to yellow; Urea aldehyde material is the opposite, the emergence of late, high cost, the advantage is the quality of hard yellow change.

Xiao Bian recommendations : Urea formaldehyde material toilet seat performance over the PP toilet seat, which is no doubt. However, toilets equipped with urea-formaldehyde toilet seats generally require 2,000 yuan or more, and the selection range is less than that of PP. The difference between the two is not as large as expected, and the price/performance ratio is low. Therefore, it is not necessary to influence toilet seats for the sake of the material of the toilet seat.

Water is located in the water tank, which plays a crucial role in controlling water intake and drainage. When people buy a toilet, they can lift the water tank cover to observe the brand of water parts. At present, some toilets sold in the market use world-famous water parts, while others use self-made water parts, and even more, use unknown water parts.

Xiao Bian suggested : When choosing a toilet, it is best to choose those products that use world-famous brand water parts, both water quality and quality are guaranteed; and some professional toilet manufacturers (such as Wrigley, Huida, etc.), due to master The core technology, so the use of self-made water to reduce costs, then this is optional; if it is unknown water, it is best not to choose.

How to choose the toilet three, the toilet to buy the Raiders glazed weight how to choose?

When making toilets, workers spray a layer of white glaze on their surfaces, which we call glazes. A good glazed surface is smooth and smooth, so excrement is not easy to adhere to its surface; while the pit glazed glaze is not visible to the naked eye, but with the increase in the number of uses, stains everywhere and difficult to remove.

Xiao Bian suggested : With the increasingly fierce competition in the toilet market, nano self-cleaning glaze, anti-bacterial glaze and other ad words endless. In fact, nanometer self-cleaning glazes are super smooth glazes, while antibacterial glazes add silver ions with antibacterial effects to the glaze. Even if they are publicized, they actually need to see their wear-resistance and stain resistance. We can use a whiteboard pen to carry out stain resistance test on the glaze. The easier it is to remove stains, the smoother the glaze is.

When choosing a toilet, you can also weigh the weight of the entire toilet (excluding the tank and the water in the bend). The heavier the weight of the toilet, the higher its density, the better the moisture content or the sintering effect. In general, a toilet with a mass of more than 50kg can be regarded as a high-quality toilet.

Xiao Bian suggestions : Now Tmall many businesses will directly mark the weight of the toilet, we can pay attention to what you buy online toilet; if you go to the physical store to buy a toilet, we can call the business called the weight of the toilet, try to select those who have not tried the water The toilet, after all, water also has weight.

How to choose the toilet four, the toilet to buy the Raiders of the Raiders way how to choose?

The flushing way of the toilet can be divided into straight flush type and siphon type, and the principle of the flushing method is quite different. The straight flush toilet flush pipe is simple, the path is short, the diameter is thick, the flushing process is short, and the water saving performance is good. The disadvantage is that the flushing sound is loud, the water surface is small, the fouling phenomenon is easy to occur, the deodorant function is poor, and the water cover is small; while the siphonic toilet flush noise is small, it is easy to wash away the dirt that adheres to the toilet surface, and the deodorant effect Good, wide variety. The disadvantage is that it consumes a large amount of water. Since the pipeline is narrow, it is easy to plug.

Xiao Bian suggested : Many consumers are hesitant when choosing toilet flushing mode, but Xiao Bian thinks it is not necessary to be entangled here. In fact, the performance of the two flushing methods is very similar, and many siphonic toilets are also very strong in impulse, and there is no need to set separate waste paper baskets. If you like the European brand toilet or do not care about flush noise, then choose straight flush toilet; and like the quiet effect, just choose the siphon-style toilet.

Many sewer drain pipes are glazing in all directions. The sewerage sewers can increase the capacity of sewage discharge and make it difficult for the toilet sewer pipes to hang dirty. However, the technical requirements for glazing in pipelines are very high. Many small manufacturers do not master this technology. Even ordinary manufacturers can only blow glaze into the pipeline, and large manufacturers will use glaze immersion technology to fully adhere the glaze. On the pipeline.

Xiao Bian suggested : In the past we would put our hand into the front of the sewage pipe, and then touch the inner wall of the sewage pipe to see if it is smooth to judge whether the sewage pipe has glazing. However, this method is still unscientific. If there are conditions, businesses can show the toilet profile and see if there is glazing at the deepest part of the sewage pipeline.

How to choose the toilet five, the toilet to buy the Raiders full water and water saving how to choose?

The so-called water seal, refers to the water in the toilet, can play a role in blocking the return of odor, the amount of water determines the size of the ability to block the odor. National regulations: The height of the toilet water seal must not be less than 50mm. The height of water seal refers to the distance from the top of the sewage pipe to the water surface.

Xiaobian recommendations : Water seal is for siphonic toilets, straight flush toilets are not water seal. The higher the water seal height is, the better the deodorant effect is, but the higher the water level is, the more likely it is to splash water. Therefore, when choosing a toilet, it is best to choose a product with a water seal height of 55mm-60mm.

The water saving effect has gradually become one of the major selling points of the manufacturers. Products with 4.8 liters, 4 liters, and 3 liters of flush water can be seen everywhere, and many consumers will not hesitate to purchase water-saving toilets.

Xiao Bian suggested : In fact, the national standard has a regulation for water-saving toilets: if the large-scale flushing volume is less than or equal to 6 liters, then it can be regarded as a water-saving toilet. Some manufacturers in order to achieve water-saving purposes, at the expense of the sewage effect, consumers need to stop flushing water to remove stains, but rather than gain. Xiao Bian believes that if water-saving toilets can not provide proof provided by the relevant state agencies, it shows that the water-saving effect of water, we must be careful to buy. If there is no special demand, buy products with less than 6 liters of water.

The above is a brief introduction to how to choose a toilet and toilet shopping guide. I hope to help you. For more information, please visit this website. Stay tuned.

Toilet

Gas Fireplace

Gas Fireplace,Indoor Gas Fireplace,Natural Gas Fireplace,Gas Insert Fireplace

JINAN LODOR CNC EQUIPMENT CO.,LTD , https://www.zgfireplace.com