How to distinguish between nozzles, return materials, decks, and recycled materials?
Opinion 1 Return material: After the new material is processed into a product, the material around the rubber mouth on the product can be added to the material used in the new material after being crushed. Sub-card: A material that does not meet the requirements in one aspect. Recycled material: granulated after recycling Opinion 2 Shuikou: It mainly refers to the rest of the parts that are made into injection molding. It is broken, that is, broken material, as if the rest of the food is eaten, it probably means so. Return material: that means recycling the granulated material. It can be corner granulation, which can be waste granulation. It refers to the material that has been recycled by machine and re-granulated. It is called back to the material and recycled N times. Sub-cards: Compared to genuine plastics, they do not meet the inspection standards when they leave the factory. They can't reach certain indicators compared with the real cards, but they can still be used. If the same batch of products comes down, the genuine label will be affixed to the genuine label. If it is not fully qualified, there will be no label, that is, the sub-card. Recycled material: It is a general term for recycled granules. It should be similar to the return, but it is more widely regenerated. Opinion 3 Shuikou: According to Guangdong, it seems to refer to the mold gate and the residual flow of the runner. Perspective 4 Shuikou: This is the Cantonese customary name. It is the shape of the gate and the runner except the product. The unqualified product and the nozzle are broken and called the nozzle. Return material: the common name of the nozzle material. Sub-card: It is a counterfeit goods or an unqualified inspection. It is definitely not the same as the physical property of the brand you want. The original qualified material is called a genuine card. Recycled material: It is the plastic product, the corner scrap is recycled and crushed, and the particles are pulled out after being regenerated by the equipment. Some additives can be added during the regeneration process to enhance the physical properties of the plastic. Aluminum Fan Blades,Axial Fan Impeller,Fan Blades For Crane,Diesel Engine Cooling Fan Blades Changzhou Keyleader Fan Technology Co. Ltd. , https://www.keyleaderfan.com