Spay Polyurea Flooring Coating Paint

Model NO.: SPUA-351
Substrate: Steel
Components: Solvent
Formation Mechanism: Conversion Type
Trademark: Yuhong
Specification: chinese standard
Origin: China
SPUA-351P1
Pure Spray Polyurea Elastic Waterproof Coating, type 1
Spay Polyurea Flooring Coating Paint
      
Description
SPUA-351P1  is  two  components  spray-up  elastic  coating  applied  in  complicated  weather. 
Component  A  is  a half prepolymer through  the  reaction  between hydroxyl  terminal compounds
and isocyanate.  Component  B  is  a  mixture  consisting  of amino  terminal  resign  and  amino
terminal chain extender, not including hydroxy acrylic resin and activator.
 
Where to use
  Railway girder concrete bridge surface;
  All constructions and water conservancy projects;
  Chemical vessels;
  Cabins and floors of ships;
  Water resistance and corrosion resistance of decks and channels; 
  Grades with wear resistant, impact resistant and skid resistant functions;
  Large area and unnormal waterproof projects.
  
Advantages
  Fast curing on any surfaces, slopes and vertical planes without sagging;
  Excellent  bonding  functions  with  all  materials,  including  cements,  steel  plates  and  wood
plates;
  Excellent sealing quality, water resistance and penetration resistance;
  Resistance to long-term acid, alkali and salt erosion;
  Good thermal stability: it can be used below 100° C for a long time;
  Good flexibility and mechanical properties, even in -40° C
  Excellent tensile strength and elongation;
  Excellent cracks deformation resistance;
  Wear resistance and impact resistance.
 
Standards
Q/SY YHF 018-2009
 
Packaging
Component A and B of SPUA-351P1 are sealed in 220kg and 200kg pails, respectively.
 
Storage
SPUA-351P1 material should be stored by clean, dry and sealed pails at dry and well-ventilated
shade places, avoiding direct sunshine. The temperature in stored places should between 10° C
and 40° C. It can not be closed to fire sources. The normal shelf time is 12 months.
 
Transportation
SPUA-351P1 is needed to be avoided rain, insolation, extrusion, collision and inversion. Keep the
packages  without  damages. Fire  sources  are  forbidden  during  transportation. The  temperature
during transportation should between 10° C and 40° C.
 
 

HSS Punches

Hss Punches,Hss Punch Pin,Hss Piercing Punches,High Speed Steel Punches

Chongqing Henghui Precision Mold Co., Ltd , https://www.citool.com