The radiator is not hot, try to close the small valve
Core Tip: The construction of a residential area in the third phase, the total heating area is more than 200,000 square meters. A few days ago, a landlord responded that his family lived on the 5th floor, but the heating effect was obviously not as good as the residents on the 2nd and 6th floors. In this regard, the province's thermoelectric customer service staff explained that the district has achieved heating and household control, and the heating effect on the 5th floor of the household is not as good as that of the neighbors, possibly due to blockage of the filter in the home or the accumulation of gas from the radiator. At the same time, some of the owners reflected that the heat in the front of the radiators in the home were not hot. The province's thermoelectric customer service staff said that the front radiators grabbed the water from the rear radiator, which directly led to uneven heat and cold. When the hot water first flows through the radiator, the flow rate is the fastest, so the first group of radiators has the best heating effect. Concerned about surprises Label: The radiator is not hot, try to close the small valve Previous: Several common materials for superhard tools Next: What are the types of universal equipment valves? B2 Grade Aluminum Composite Panel Aluminium Sandwich Panel,Composite Panel Aluminium,Aluminum Composite Panel For Sale,Aluminum Composite Material Panels SHAOXING YOTO IMPORT&EXPORT CO., LTD , https://www.sxytmaterial.com
It is understood that the same stable heat source for heating, many factors affecting the heating effect, eliminating the failure of heating facilities, the size of the apartment, the height of the floor, the floor, etc. can play a big role, the residents living in the middle of the middle layer Because the neighbors use heat from the top, bottom, left and right, the heating effect should be significantly better than the top layer.
In this case, the user can turn the front radiators of the home slightly to close the small valve and distribute the flow to the back, so that the heating effect of each radiator in the home can be adjusted more evenly. It is best to open the valve to the maximum heating effect. 