Mining machinery operating procedures
Once the machine has successfully completed the test run, it can be officially put into production. To ensure its long-term safe and efficient operation, it is crucial to follow proper operating procedures, perform regular maintenance, and conduct routine inspections. These steps not only extend the lifespan of the equipment but also prevent potential safety hazards. 1. Pre-Operation Preparation: Before starting the machine, a thorough check must be conducted to ensure everything is in order. All components should be intact, and no parts should be missing or damaged. All bolts and anchor nuts must be securely tightened. Additionally, make sure that all accessories are properly positioned and do not interfere with the normal functioning of the machine. It's also important to clear the area of any unnecessary items that might cause obstructions or safety issues. 2. During Normal Operation: Once the machine is running smoothly, operators and relevant personnel should remain vigilant and monitor the following key aspects: (1) Regularly check if any fixing bolts have become loose or broken.
(2) Ensure that the lubrication system is working correctly and there is no oil leakage from the bearings.
(3) Inspect all seals to confirm they are tight and free from leaks.
(4) Monitor the feed amount to avoid overloading and verify that the discharge particle size meets the required specifications.
(5) Observe the movement of the rollers and gears to ensure they are operating normally without unusual noise or vibration. 3. Additional Safety Notes: 1. Never alter the direction of rotation of the machine unless explicitly instructed by the manufacturer.
2. In case of a power failure, immediately disconnect the power supply to prevent unexpected startup and potential accidents.
3. Always wear appropriate personal protective equipment (PPE) while operating the machine.
4. Avoid overloading the machine beyond its designed capacity to prevent mechanical stress and damage.
5. Keep the operating area clean and well-organized to maintain a safe working environment. Cold Room High Speed Rolling Doors Cold room High Speed Doors are specially designed for cold rooms, refrigeration warehouse, and cooler rooms. Its door curtain is made into double skin structure filled with thermal insulation wool. With both fast running speed and thermal insulated curtain, such cold room rapid doors can help reduce heat loss and keep low temperature inside cold rooms. This will obviously reduce eletricity energy cost for busy traffic areas. cold room high speed door, cold room rapid doors, insulated high speed door, insulated rapid door SHANGHAI KENVO DOOR CO.,LTD , https://www.kenvodoor.com