Mining machinery operating procedures

Once the machine has successfully completed the test run, it can be officially put into production. To ensure its long-term safe and efficient operation, it is essential to follow proper operating procedures, perform regular maintenance, and conduct routine inspections. These steps are crucial for preventing failures and extending the lifespan of the equipment.

1. Pre-Operation Preparation:

Before starting the machine, a thorough inspection must be carried out to ensure everything is in order. All components should be intact, with no damage or wear. Every bolt and nut that secures the machine should be tightly fastened. Additionally, all accessories must be properly placed so they do not interfere with the machine’s operation or create any hazards.

2. Normal Operation Guidelines:

During normal operation, both the operator and other relevant personnel should closely monitor the following aspects:

  • Check if all fixing bolts are secure and show no signs of loosening or breakage.
  • Ensure that each bearing is well lubricated and there is no oil leakage.
  • Verify that all seals are tight and there are no leaks present.
  • Monitor the feed amount to avoid overloading and confirm that the discharge particle size meets the required standards.
  • Check that the rolls and gears are operating smoothly without unusual noises or vibrations.

3. Additional Safety Notes:

  • Never change the direction of rotation of the machine unless explicitly instructed by the manufacturer.
  • If the machine experiences a power failure, immediately disconnect the power supply to prevent unexpected restarts that could lead to accidents.
  • Always refer to the user manual for detailed instructions and guidelines specific to your model.
  • Keep the work area clean and free from debris to reduce the risk of malfunctions or injuries.
  • Regularly schedule maintenance checks based on the manufacturer's recommendations to keep the machine in optimal condition.

Exterior Use High Speed Roller Doors

Exterior use High Speed Doors are designed for outside doors of factory and warehouse, which will face wind pressure from outside. Such exterior rapid doors need be reinforced to withstand big wind.

Normally, if such doors are made from PVC fabric, it must be supported with metal wind bars at the middle. And the high speed door can be aluminum material, to get biggest wind resistance.

exterior high speed door, exterior rapid rolling door, exterior use fast door

SHANGHAI KENVO DOOR CO.,LTD , https://www.kenvodoor.com