Bearing ring super finishing process

January 16 09:20:37, 2021

Home>Bearing knowledge> Bearing ring super finishing process
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Bearing ring super finishing process

Source: Bearing network time: 2018-04-18
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Super finishing can usually be divided into three periods: cutting period, half cutting period, and finishing period.
(1) When the surface of the grindstone and the surface of the rough raceway are touched during the cutting; because the touch area is more than that of the ノ ノ 沽 沽 沽 沽 沽 螅 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔Resignation of Xing 鳌 饔茫 饔茫 ナ砻娴牟糠 ナ砻娴牟糠 チ チ チ チ 浜 浜 浜 浜 浜 浜 浜 浜 浜 浜 浜 チ チ チ チ チ チ チ チ チ チ チ 腿 腿 腿 腿 腿 腿 腿 腿 腿 腿The cutting and anti-cutting effect removes the peaks on the surface of the workpiece and grinds the enthalpy layer. This period is called the cutting period; during this period, most of the metal allowance is removed.
(2) During the half-cutting process, the machining continues; the surface of the workpiece is gradually smoothed. At this time; the touch area of ​​the grindstone and the workpiece is added; the pressure per unit area is reduced. Xing Wei burns. Xing Wei. Together; The pores of the stone surface are blocked; the grindstone is in a half-cut condition. This period is called the half-cutting period; during the half-cutting process, the cutting marks on the surface of the workpiece become shallower; and the darker luster appears.
(3) During the finishing period, this is the final period of super-finishing. The surface of the workpiece is gradually smoothed; the touch area of ​​the grindstone and the external appearance of the workpiece is further increased; and; the grindstone and the appearance of the workpiece are gradually blocked by the smooth oil film; The pressure on the unit area is very good. The patrol is allowed to circulate the gongs and the sputum is sputum. The sputum is called V-Xing. This period is called the finishing period. There is no cutting marks on the surface during the finishing period. Showing all the luster.

Recommend to friends comments close window

Bearing related knowledge
The locomotive bearing device method grinder static pressure bearing repair experience talk about the key skills in the bearing manufacturing safety measures when the bearing is bearing bearing dust seal ring


This article links to http://
Please indicate China Bearing Network http://

Previous:The bearing professor describes the device of the oscillating motor imported bearing. The next part: the drawing principle of the fine guide rail

Hexagonal wire mesh


Material: High quality low carbon steel Wire, PVC wire, Stainless steel wire

Weaving and characteristics: Normal twist, reverse twisted. Galvanized after weaving, galvanized before weaving. It devided to electric galvanized, hot dip galvanized, plastic coating, stainless steel, etc.

Hexagonal wire mesh has the characteristics of corrosion-resisting and oxidation-resisting.

Uses: Widely used in building, breeding, industry, etc

Hexagonal wire mesh adding reinforce wire

Hexagonal wire mesh

electric galvanized hexagonal wire mesh, hot dip galvanized hexagonal wire mesh, PVC hexagonal wire mesh, chicken mesh, chicken hexagonal wire mesh

Anping Deming Metal Net Co.,Ltd , https://www.wovenfence.nl