Because the length and width of each floor are the same, but the number of consumers can not be exactly matched with the area of ​​the room to be laid, so some floors will be cut, such as 90 cm long floor, such as the use of 80 cm, left The next 10 cm must be put together in other places. If it cannot be put together, it cannot be used.

Because according to the rules, after the consumer finishes flooring, the complete floor can be returned. In order to prevent consumers from returning goods, some small brand or no-name installers use the way to increase losses to make consumers spend more money, such as Deliberately cut full boards etc.

In the other case, some floors themselves are “less than two”, such as boards that should have been 90 centimeters long, but some manufacturers offer only 85 centimeters each. When consumers purchase, they often count only the number of floors but do not measure the length and width of each floor. In this way, the number of floors that will eventually be used will increase. For example, as long as the prediction uses 80 square meters of area, but in the end actually used 90 square meters, consumers eventually only a few hundred dollars, or even a few thousand dollars.

In general, the loss of floor laying is only 3% to 4%, and the utilization rate can even be reduced to 2%. In other words, if the consumer purchases a 100 square meter floor, the loss area should be controlled between 2 square meters and 4 square meters. In addition, the loss of the floor in the square room will be smaller, and the loss in the circle will be higher. If consumers find that the floor area laid is more than 5% larger than the area of ​​the room, they can ask floor manufacturers for a reasonable explanation.

Del Floor Nature Flooring Room

Hydraulic Ironworker

Hydraulic Ironworker,Shearing Machine Hydraulic Ironworker,Hydraulic Ironworker Saw,Shearing Cutting Machine

Lishui Aiteli Machine Equipment Co.,Ltd , https://www.aitelimachine.com