Solid wood floor maintenance

Solid wood floor maintenance Try to avoid the alkaline washing liquid to touch most of the solid wood flooring is paint, a small part of the wood floor surface is a wooden grease, a large number of daily alkaline lotion, will destroy the solid wood floor surface protection, resulting in damage to the solid wood floor itself, and its own solid wood floor bogey water. Therefore, the cleaning of solid wood floors must be done with wrung mops. A small amount of stain can be rubbed repeatedly with a clean wet cotton cloth.

Do not dry directly on the surface of the floor, if it is dry, it will easily lead to indoor floor cracking. The timely increase of the humidity on the surface of the floor can effectively alleviate the problems of cracking and warping caused by the drying of the floor. However, it is not appropriate to provide a large amount of water for the floor to moisturize, but it is necessary to actively adjust the indoor humidity.

The number of floor waxing should not be too frequent for the floor waxing, it can extend the life of the floor. Appropriately waxing the floor can play a role in preventing moisture, preventing damage, increasing surface luminosity and facilitating cleaning. However, if waxing and maintaining the floor frequently, the wax wax layer will be superposed, and there will be a gray layer in the middle of the wax layer, which will affect the waxing effect and cause damage to the floor.

It is necessary to carry out necessary maintenance on the floor so as to ensure the service life of the floor. However, if it is over-maintenance, it will result in a counterfeit effect, which will adversely affect the service life of the floor.

Double Disc Grinding And Polishing Machine

Grinding and polishing are the same mechanical movement, the principle is the same. But for surface quality, the surface finish of polishing is higher than that of grinding. In fact, polishing fluid can be said to be the last process of grinding, grinding and polishing can be realized on the same plane polishing machine at the same time. Grinding is divided into rough grinding, fine grinding, polishing is divided into rough throwing, fine throwing. Most of the time, we have three processes to process the surface quality of products: rough grinding, fine grinding, fine polishing. With these three processes, the workpiece surface flatness, parallelism, roughness is quite high. Some customers do not have such high accuracy requirements, especially roughness requirements are not so high, so they only use the first two processes, or the fine grinding process. Specific to see the quality of the workpiece surface itself, as well as customer requirements to achieve the quality.

Double Disc Grinding And Polishing Machine,Disk Polishing Machine,Bench Grinder Buffing Machine,Bench Polisher And Grinder

TROJAN (Suzhou) Technology Co., Ltd. , https://www.troolymaterial.com