[China Aluminum Network] aluminum titanium plating process, which belongs to the coating technology, it is based on the conventional titanium plating process to increase the pre-plating and plating process steps, pre-plating process is to put the activated plating parts in salt and hydrochloric acid The chemical treatment is performed in an aqueous solution; the plating solution of the electroplating process includes nickel sulfate, nickel chloride, boric acid, sodium lauryl sulfate, saccharin, brightener, and the process is simple, practical, and has good effects, and is obtained by this process. Titanium aluminum profiles have a film hardness of HV ≈ 1500 and a wear resistance of 150 times that of 22K gold plated under the same conditions. They can be processed into gold, color, black and other bright aluminum products in various forms.
Titanium-plated aluminum process, including material selection, polishing, chemical deoiling, water rinse, activation, vacuum titanium plating process steps, is characterized in that it also includes:
a. Pre-plating process. The process consists of placing titanium aluminum profiles activated and rinsed with clean water in a liquid consisting of salt, hydrochloric acid and water for chemical treatment. The processing temperature is room temperature, and the processing time is violent to the liquid. Up to; b, electroplating process, the bath composition includes nickel sulfate, nickel chloride, boric acid, sodium lauryl sulfate, saccharin, brightener, process conditions: current 3-4A/dm2 cathode movement, 5-7A /dm2 air stirring, bath temperature 50-60°C, PH value 3.9-4.2, plating time 15 minutes.

Electronic Lighter

The utility model provides an electronic igniter, which is characterized in that it is composed of a shell with an ignition port at the left end and a button port on it, an ignition tube connected with the ignition port at the left end of the shell, an ignition device fixedly connected with the button port, and a cable connected with the ignition device. The ignition device is composed of a rectangular shell and a button sliding connected with the upper end of the shell, The utility model is composed of a striker connected with the lower surface of the button, a power generation ceramic block fixedly connected with the bottom of the shell, a thimble connected with the upper surface of the power generation ceramic block, and a spring which is connected with the power generation ceramic block and sheathed outside the thimble. The electronic igniter has the characteristics of simple structure, safe and reliable, convenient operation, no need to use batteries, etc., which is not only economical and environmental protection, but also convenient for wide promotion.

Jet Flame Camping BBQ Outdoor Lighter,Outdoor Gas Lighter Torch,Refillable BBQ Gas Lighter

Shangqiu Zhengtu Hardware Technology Co,.Ltd , https://www.zlztlighter.com