Identify the quality of the tiles

Home decoration must buy tiles, how to buy value for money, satisfactory tiles also have a certain knowledge, in general, the principle of buying tiles are: a look, two, three drops of water, four feet.

First, look at the appearance. The color of the tiles should be uniform, the surface finish and flatness should be better, the surrounding rules and patterns should be complete, and four or five pieces should be extracted from a box to see if there are any defects such as color difference, deformation, missing corners, and less angles.

Second, listen to the sound. With hard objects tapping, the more crisp the sound, the higher the porcelainity and the better the quality. You can also use your left thumb, forefinger, and middle finger to clip a corner of the tile. Hang it down easily and tap the lower part of the tile with your right index finger. If the voice is clear and sweet, it is the top grade. If the sound is boring, the turbidity is the next product.

Third, dripping test. The water droplets can be on the back of the tile to see how quickly the water spreads after infiltration. In general, the slower the water absorption, the greater the density of the tile; on the contrary, the faster the water absorption, the denser the density, and the inherent quality of the former is excellent.

Fourth, the amount of feet. The higher the accuracy of the tile side length, the better the effect after paving. Buying high-quality tiles is not only easy to construct, but also saves man-hours and accessories. With a tape measure, there is no difference in the size of each tile, and the highest precision is the top grade.

In addition, to observe its hardness, the ceramic tile has good hardness, high toughness, and is not easily crushed. Scratches between the tile corners and tiles to see whether the broken pieces are broken or loose, whether hard, brittle, or soft, whether it is left scratches or scattered powder, if the former is the top grade, the latter is the top quality. difference.

Tile entrance decoration home decoration

There is a limited number of on-site group buying activities. Register now

Related Reading
How to identify the quality of tiles

A ceramic tile is a kind of building or decorative material that is made of refractory metal oxides and semi-metal oxides through the process of grinding, mixing, pressing, glazing, and sintering to form an acid-base resistant porcelain or stone. Always called tiles. Its raw materials are mostly made of clay, quartz sand, etc. Tile selection method: home decoration should buy tiles, how to buy value for money, satisfactory tiles also have a certain knowledge, in general the principle of buying tiles is...

2012-03-14 14:05:25

Corner Bathtub

Corner Bathtub

Corner Bathtub

Guangzhou Aijingsi Sanitary Products Co.,Ltd , https://www.comoxvalleyhottubs.com