UG/Nurbs PathGenerator (UG/Nurbs spline trajectory generator)

The UG/Nurbs Path Generator spline trajectory generator module allows toolpath data based on Nurbs splines to be generated directly in the UG software, resulting in a higher accuracy and smoothness of the generated trajectory, while the processing program is 30% less than the standard format. 50%, the actual machining time is greatly shortened because it avoids the waiting time of the machine controller. The module is desirable to use a high speed milling machine (FANUC or SIEMENS) having a spline interpolation function of the user necessary tool UG / Lathe (UG turning) <br> <br> UG Turning module provides roughing, finishing multiple passes, vehicle Parameters such as undercut, thread and drill center hole, control feed amount, spindle speed and machining allowance, and tool path display on the screen, can detect whether the parameter setting is correct, and generate the original tool position (CLS).

UG/Core & CavityMilling (UG core, cavity milling)

UG core and cavity milling can finish roughing single or multiple cavities, roughing large shapes along the shape of any similar core, generating tool movement trajectory for very complicated shapes, determining the way of passing and passing Poor cavity milling can be designed with low precision, gaps and overlapping shapes between the surfaces, and the surface of the cavity can be up to hundreds. When the profile is abnormal, it can be corrected by itself or within the tolerances specified by the user. Functions such as cavities are processed in the range.

UG/Planar Milling (UG plane milling)

The function of the UG plane milling module is as follows: multiple pass contour milling, contouring inner cavity milling, zigzag milling milling, specifying the safety margin for avoiding the fixture and internal movement, providing cavity layered cutting function, concave The island bottom surface processing function, the definition of the boundary and the wool geometry, the boundary of the uncut area, and some instructions for machine-assisted motion, such as cooling, tool compensation and clamping.

UG/Fixed AxisMilling (UG fixed axis milling)

The function realization of UG fixed-axis milling module is described as follows: 3-axis linkage machining tool path, machining area selection function, multiple driving methods and cutting mode are available, such as cutting along the boundary, radial cutting, spiral cutting and user-defined cutting. In the boundary driving mode, you can choose a variety of cutting methods such as concentric circles and radial walking, provide up-cut milling, down-milling control, and spiral feed mode, and automatically identify the unprocessed areas and steep portions that cannot be cut before the previous process. Area, so that users can further clean these places, UG fixed axis milling can simulate the tool path, generate the tool position file, the user can accept and store the tool position file, or delete and modify some parameters as needed and recalculate.

UG/Flow Cut (UG automatic clearing)

Automatically find the area on the part to be machined that satisfies the “double tangency condition”. In general, these areas are just the root zone and corner in the cavity. The user can directly select the machining tool. The UG/Flow Cut module will automatically calculate the “Double Tangent Condition” area corresponding to this tool as the drive geometry and automatically generate one or more passes. This module reduces the amount of finishing or semi-finishing work when complex core or cavity machining occurs.

UG/Variable Axis Milling (UG Variable Axis Milling)

The UG/Variable Axis Milling Variable Axis Milling Module supports both fixed and multi-axis milling functions to machine any geometry generated in the UG Modeling module and maintain the master model correlation. This module provides 3~5 axis milling function for many years of engineering use verification. It provides tool axis control, pass mode selection and tool path generation function UG/Sequential Milling.

The UG sequential milling module can realize the following functions: control each step of the tool path generation process, support milling programming of 2~5 axes, and completely related to the UG master model, and obtain the same APT direct programming in an automated manner. Absolute control, allowing the user to interactively generate tool paths one segment at a time, and maintain control over each step of the process, providing a loop function that allows the user to define only the innermost and outermost tool paths on a surface, by the module The step of automatically generating the middle, the module is the UG-specific module like the automatic clearing root in the UG CNC machining module, which is suitable for the difficult NC programming.

Previous page next page

HITACHI Parts

Hitachi Pump Device,Hitachi Hydraulic Pump,Hitachi Main Valve Assy,Hitachi Control Valve

JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.stszcmparts.com