Electronic Crane Scale Requirements for Use Environment
Washers are generally flat metal rings used to protect the surface of the connected parts from being scratched by the nuts, dispersing the pressure of the nuts on the connected parts. The gasket is a mechanical seal between two objects, which is usually used to prevent the impact of pressure, corrosion and pipeline natural thermal expansion and contraction leakage between two objects. The materials of rubber gaskets usually include Nitrile rubber, styrene butadiene rubber, hydrogenated Nitrile rubber, EPDM, silica gel, fluorine rubber, neoprene, perfluorocarbon, etc. Gaskets are usually made of sheet materials, such as pad paper, rubber, silicone rubber, metal, cork, felt, Neoprene, Nitrile rubber, glass fiber or plastic polymer. Shim Washer,White Astm F436m Washer,High Strength Shim Washer,F436 High Strength Shim Washer AM FASTENER , https://www.asmefastener.com
(1) Electronic crane scales are precision measuring instruments rather than ordinary spreaders and locks, so when not used for measurement, please store them in a cool and dry place.
(2) The electronic crane scale cannot work under high temperature environment for a long time. When using a high temperature source on the site, even if the high temperature insulation device is used, care should be taken to shorten the dwell time as much as possible. The general principle is that the bottom surface of the scale housing is not hot to the touch. (Below 70 °C) will not have an adverse effect on the electronic crane scale.
(3) The scale body should be very careful to avoid violent collision and rain immersion, and special attention should be paid to prevent the scale body from falling off the hook, causing the scale body to be damaged or even personal accidents.
Electronic crane scale operation:
(1) Do not overload.
(2) When lifting a heavy object, it must be lifted vertically and it is forbidden to drag heavy objects through the scale body.
(3) When using the electronic crane scale, the operator should keep a certain distance from the object to be suspended so as to avoid accidental fall of the object and cause harm to the human body.
(4) Before using the electronic crane scale, check if the screws, hooks, lifting rings, cotter pins and other parts are loose, fall off, deformed or worn to ensure safety. It also provides routine maintenance and inspection work.
(5) Charger Please use the dedicated charger we provide for you. Improper use of the charger may cause overcharge of the battery, shorten the battery life, and even endanger the safety.
(6) When the instrument handle is adjusted, please pull it out evenly and allow it to rotate to an easy-to-use angle.
(7) In the instrument, it is necessary to input the password first to perform the function of the subsequent operation. Non-professional testing personnel are not allowed to enter the operation without authorization. Therefore, any adverse consequences that may occur will not be borne by the company.