How to reduce the noise and vibration of the decanter centrifuge
Anyone who has used a horizontal centrifuge will find that there are noise and vibrations when using the decanter centrifuge. How do we reduce this situation? When the whole set of equipment is running empty and the feeding and discharge ports are closed, the average noise at 1 meter around the equipment will not exceed 85dB when tested at the manufacturer. When the centrifuge is idling, no water, when tested at the manufacturer, the vibration will be no higher than 5mm / S. If the vibration is too large during the operation of the machine, it can be stopped by the vibration switch for safety. 3. The centrifuge is equipped with emergency stop, motor overheat/overload, screw feeder overload, bearing temperature, vibration and other protection functions. When the whole set of equipment is running empty and the feeding and discharge ports are closed, the average noise at 1 meter around the equipment will not exceed 85dB when tested at the manufacturer. When the centrifuge is idling, no water, when tested at the manufacturer, the vibration will be no higher than 5mm / S. If the vibration is too large during the operation of the machine, it can be stopped by the vibration switch for safety. Concerned about surprises Label: How to reduce the noise and vibration of the decanter centrifuge Previous: The condition and drainage caused by overheating of the material temperature of the slime dryer Next: The structure and maintenance of the ultra-low temperature refrigerator
Industrial sectional doors are the most durable and longest lasting doors to ensure circulation at the areas of the factory entrance and exit of goods, loading and unloading areas.
The body of sectional door is forming by 40 mm sandwich panels. These panels provides sound and heat insulation due to the intense doped polyurethane insulation was injected between galvanized steel sheet. (50 kg/m3).
Industrial sectional door systems provide space-saving with opening parallel to the ceiling.Any opening can be used clearly . and produces in accordance with the transition range and the height in the factory buildings or warehouses.
Doors is working sliding by be the most appropriate the gap between the top level of the gate with a ceiling height within the side rasils. The door can be mounted in different ways according to the gap distance (standard, low, highlift and vertical track systems).
Industrial sectional doors can easily be opened automaticly by 230-380 V-AC/50 Hz electric motor or manualy thanks to torsion spring system that balances the weight of the door.The galvanized springs are made to be durable of 25.000 door cycles.Motor with emergency chain All the drive systems have a mechanical back-up system fitted to the reduction gearbox of the electric motor, so that the sectional door can be opened if the power fails. The reduction gearbox can then be powered using the chain.
Industrial Sectional Door,Industrial Overhead Sectional Door,Industrial Warehouse Sectional Door,Industrial Garage Interior Sectional Door Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffastdoor.com
1. There is no need to disassemble the material blocking fault, as long as the screw feeder device is started to automatically discharge the slag and clear the accumulated material.
2. The centrifuge should be backwashed when it is stopped. The backwashing can be completed simply by turning on the flushing water valve and flushing the pump. 