Temperature Sensor

1. A flow sensor is a component that collects the temperature of water and emits a temperature signal. It generally uses a thermal resistance material, and the resistance value of the material changes with temperature. The heat meter uses a Pt1000 paired temperature sensor with a pairing error <0.1 °C. One has a red sign, installed at the water inlet, and one has a blue sign that is installed at the water outlet. Pt is a molecular formula of platinum, which has a large temperature coefficient and a constant temperature coefficient within a certain temperature range. R0=1000, that is, at 0 ° C, the resistance of the temperature sensor is 1000 Ω;

2. Flowmeter (base table): A component that collects the flow of water and sends a flow signal. The heat meter uses a Wiegand flow meter.

The temperature sensor commonly used in heat meters is a resistor wound by platinum wire. The higher the temperature, the higher the resistance value. The size of the resistor can be measured by the wire to a long distance. According to the change of platinum resistance, we can Get a change in temperature. Of course, the temperature sensor is not the same one, and other kinds of sensors can also be used.

Heat meter flow sensors are commonly used in orifice differential pressure, vortex, and turbine. The turbo flow sensor is a small hydroelectric generator, and the hydroelectric generator for hydroelectric power generation is a truth. It's just very small and simple, it's just made up of an impeller in the pipe and a coil outside the tube. There is a small magnet on the impeller. When the impeller is rotated by water, the coil cutting magnetic line will send an alternating signal. The greater the flow of water in the pipe, the faster the impeller turns, and the higher the frequency of the AC. Frequency is used to represent the flow, so it is easy to pass elsewhere, so this is called a sensor.

The temperature signal measured by the temperature sensor and the flow signal measured by the flow sensor are finally sent to the microprocessor, and its software performs the operations of multiplication, subtraction, and accumulation. Finally, the results are displayed in the window of the instrument by numbers. You can even send it to the bank through the network, and automatically deduct the heating fee from your account, which saves both trouble and trouble.

At present, most domestic IC card heat meters use magnetic steel to rotate, and double dry reeds receive pulse counts. Now again, the Wiegand components are gradually being adopted.

Wiegand component advantages: 1. Generate pulse power consumption is zero.

2. The output pulse amplitude and width are constant in the pulse repetition frequency range of 0~10KHz, which is independent of the rotation (moving) speed of the measured object, and is suitable for ultra-low speed detection.

3. No mechanical movable parts, no contact, solid package, good environmental tolerance

4. Wide operating temperature range (-196°C~+300°C)

Integrator

The temperature signal sent by the temperature sensor, the flow signal sent by the flow meter, and the components for heat calculation, storage and display. At present, the core single-chip microcomputer of most heat meter integrated calculator adopts integrated single-chip microcomputer, which has powerful performance, stable and reliable, ultra-low power consumption, can adapt to the requirements of harsh heating environment, and also uses Chinese characters and numerical characters to display various measurement parameters, and the parameters can be displayed cyclically. Clear and intuitive, the parameter display resolution is high, which greatly meets the requirements of metrological verification display.

Grinding Stone

Industrial applications editor broadcast

Whetstone sintered corundum (ruby) : A kind of microcrystalline corundum product sintered at high temperature. It has a compact and delicate structure and high hardness and strength.

The products are rosy red. The products are small grinding wheel type whetstone, standard type whetstone and grinding head type whetstone. When grinding the workpiece, it can maintain sharp edge and stable geometry for a long time.

It is suitable for forming and grinding of instrument industry, precision parts, micro cutting tools, tools and precision abrasive tools, etc. The precision surface roughness of machining can reach about 0.05μm.

Product SPECIFICATIONS: flat sand wheel whetstone with diameter less than 100 for small grinding wheel type, whetstone with various geometric shapes less than 200*50*25 for standard type, whetstone with diameter less than 25 for grinding head type.

Grinding method

About diamond grinding paste, particle size from W40 to W0.5. W40 is the coarsest, with a large amount of grinding, and W0.5 is the smallest. It is used for polishing, and it does not anneal, and it can also grind the hard knife.

Method of use:

The coarse W40 abrasive paste applied to borotartar can accelerate and increase the grinding amount without annealing.

Then, AFTER the rough grinding paste on the knife is cleaned, W0.5 grinding paste is applied to the ruby or natural jade for polishing, and the effect thrown out is a mirror.

Green silicon carbide, white corundum, brown corundum of these three kinds of whetstone hardness is not enough, coupled with a little coarse particle size, easy to grind out the cross, and the other three kinds of whetstone in polishing, grinding will not annealing.

If the particle size is greater than 1000, there is no difference. It mainly depends on the grinding paste used. When the grinding paste of W1.5 is applied to the ruby with 1000 mesh, its grinding effect is the effect of the grinding paste of W1.5, that is, the effect of the whetstone with 2500 particle size

Grinding Stone,Diamond Grinding Pellets,Carborundum Oil Stone,Oilstone Sharpening Stone

Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com