The installation of the roller shutter door motor is a relatively complicated process. Only when the motor is installed, the roller shutter door can automatically rise and fall, thus playing its role. The following Xiao Bian will introduce how to install the rolling shutter door motor. I hope to help everyone.

Roller shutter door motor main features

1, light weight, small size, good quality;

2, low noise, low vibration, low power consumption;

3, beautiful appearance, advanced structure; strong power, saving energy;

4, easy to install, convenient and thoughtful; electric manual, double matching;

5, remote control operation, fire and security; broken chain protection, safe and reliable;

The working environment and working conditions of the motor

1, the ambient air temperature changes with the season

2, the ambient temperature: -25 degrees Celsius - 55 degrees Celsius

3, relative humidity is 90% (25 degrees Celsius)

Install shutter door motor

1. Before the test machine, loosen the locking screw of the limiting mechanism;

2. Then pull the ring chain by hand to make the curtain door about 1 meter away from the ground;

3, first try "up", "stop", "down" button: Observe roll up, stop, down each function is sensitive and reliable: if normal, the curtain can be raised or lowered to your determined position;

4. After the rotation limit screw sleeve: adjust the touch switch to the micro switch: After hearing the "drop" sound: tighten the locking screw;

5. Repeated debugging: When the limit is reached at the best position: tighten the locking screw tightly with the fingers and tighten the door machine horizontally; the curtain reel should be concentric, horizontal, and the curtain does not have stagnation.

6. Adjust the droop of the chain to 6-10mm (adjust before the curtain is hanging).

7. The cross-section of the power supply external power supply of the rolling door machine is not less than 1mm;

8. The opening and closing of the electric roller gate motor is only required to operate the switch button: the door stops automatically after the door is in place.

9, if you want to stay in the middle: when the door is up or down: operation stop button.

10, electric shutter doors have a good advantage is in the case of power outage: you can also operate the manual mechanism, pull the chain, pull the door slowly, stop pulling after the place;

11, should not exceed the original limited height: so as not to over-damage limit pull switch.

12, pull the weight rod: Rolling door constant speed down: close to close quickly: should release the weight drop lever: then pull again to reach full closure.

The above is a brief introduction for Xiaobian. If you want to know more related information, please continue to pay attention to Qijia Consulting. More exciting consultation, please stay tuned.

Rolling shutter doors Fire shutter doors Construction Installation Curtains Installation method Heating installation Rolling shutter door motors

Galvanized Barbed Wire

Galvanized Barbed Wire,Galvanized Barbed,Zinc Coated Steel Barbed Wire,Galvanized Wire Coatings

Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.hdgabion.com