Smart ATM machine protection cabin function and installation introduction
Kitchen Floor Drain,Stainless Steel Kitchen Floor Drain,Hidden Square Gold Shower Floor Drain,Round Black Shower Floor Drain Kaiping City Jinqiang Hardware Products Co.,Ltd , https://www.jqfloordrain.com
The intelligent protection cabin control system is the most important part of the intelligent ATM machine's protection bay. It consists of an intelligent access control module, a status display module, a voice prompt module, a personnel detection module, an ATM face intelligence analysis module, a multi-person detection module for protection bays, and foreign objects. Intrusion detection alarm module, intelligent fill light module, intelligent ventilation module, etc., its functions are as follows:
The intelligent access control module consists of a protection bay controller, an electronic lock and a human body sensing device. When customers use the bank's self-service equipment, they can be locked inside or locked automatically, and they are not open to other customers at the same time;
The status display module shows the status of the protection bay. When someone withdraws money, the display shows "In operation, please wait" (customer can choose LED dynamic display module);
The voice prompt module is mainly to remind the payer of some matters needing attention, including the police reminder, the bank welcome message, somebody's operation, the door is not closed, the end of the language and so on;
The personnel detection module is to detect the status of the personnel in the protection cabin (including the status of personnel operation, personnel accidentally falling to the ground, etc.);
The guard cabin access controller is equipped with a network interface to access the network;
The smart light module detects the brightness of the surrounding environment in 24 hours. When the brightness is lower than the normal standard, the fluorescent light will be automatically turned on to ensure that the money is paid to the user.
Intelligent ventilation module detects the temperature of the surrounding environment and the status of people in the cabin around the clock and opens the ventilation system in a timely manner to ensure that the depositor is in a comfortable environment.
Protection bay installation
After getting the cabin metal, wear the thread that can be worn before installing the glass (such as: emergency button, door open button, infrared radiation, etc. to the installation position, if the cable cannot be fixed in the specified position, In order to prevent the worn thread from falling off again, apply two adhesive tapes with strong adhesiveness at both ends, and perform secondary processing or reopening the hole on the sheet metal that does not conform to the specification. When installing the glass, use 3mm screws to fix the rivets.
Stainless steel panels, seams, corners, etc., with a polishing machine in advance;
When installing on site, follow the principle of first dimension, then open the hole and install the lead. Two expansion bolts must be installed at the bottom left and right frames, and two are installed on the left and right sides of the wall, for a total of eight;
When the two left and right facades are fixed, they should not be fixed too firmly. After the door is installed, test the door's switch and fix it.
All the holes to be routed through the installation of the equipment are well laid, and not large enough;
After the frame is installed, install door handles, door closers and electromagnetic locks;
After all the installation is completed, make transparent glass glue at the joint;
When the power supply line of the bay is plugged, the company is marked on the label sheet.