Eight advantages of rubber and plastic insulation materials?

(1) Green and environmental protection: It does not contain harmful chlorofluoride in the atmosphere and meets the requirements of ISO14000 international environmental protection certification. Therefore, it will not produce any harmful pollutants in human body during installation and application. (2) Low thermal conductivity: Rubber and plastic is a high-quality thermal insulation material. It is a nemesis for cold, heat and anti-condensation. It has low heat transfer coefficient and remains stable. It has an insulation effect on any heat medium. (3) Good fire performance: The rubber and plastic materials conform to the national standard GB8624 "Combustion Performance Analysis Method for Building Materials". The test is judged as GB8624 B1 class flame retardant material. (IV) Closed-bubble structure: Rubber and plastic is a closed-bubble structure. The water in the outside air is difficult to penetrate into the material. It has excellent resistance to water vapor permeation, and it is not necessary to add a vapor barrier layer to the surface of the cold insulation layer. The wet resistance factor μ of rubber and plastic is greater than 3500 (ISO9346). It forms a built-in waterproof vapor layer, even if the product is scratched, it will not affect the overall vapor barrier. Rubber is the insulation layer and the moisture barrier. (5) Thin material and space saving: The thickness of rubber and plastic used is reduced by about two-thirds compared with other insulating materials. Therefore, the space above the ceiling of the floor can be saved and the indoor height can be improved. (6) Long service life: Rubber and plastics have excellent weather resistance, anti-aging, anti-cold, anti-inflammatory heat, anti-drying, anti-moisture, anti-ultraviolet, ozone-resistant, twenty-five years old, no deformation, no Maintain characteristics such as service life. (7) High-grade appearance and uniform appearance: rubber and plastic have high elasticity and smooth surface layer, and the texture is soft. Even if it is installed on irregular parts such as elbows, tees, valves, etc., it can be kept intact and beautiful, and the appearance does not need to be decorated, even if High ceilings can also be maintained without ceilings. (8) Easy and fast installation Because the material is soft and there is no need for other auxiliary layers, the construction and installation are simple. For the installation of the pipeline, it can be put together with the progress of the pipeline installation. The rubber and plastic pipe can be cut open and then glued with special glue. It can be combined.