Shanghai aerated concrete block equipment manufacturers give investment friends a detailed explanation of their product line process
September 07 05:01:35, 2025
In today's society, there is a growing emphasis on energy efficiency and environmental protection. As a result, aerated building materials have become one of the most promising options in the construction industry due to their eco-friendly nature. With this increasing demand, more and more investors are turning their attention to aerated concrete production lines. However, manufacturers of aerated concrete block equipment strongly advise potential investors that such investments come with significant risks and require careful consideration.
Despite these challenges, many Chinese aerated concrete block equipment manufacturers have made remarkable progress in recent years. By incorporating advanced foreign technologies and continuously innovating, they are now actively working on building intellectual property protections for their brands and related technologies. This development signals a shift towards a more sustainable and competitive market.
Shanghai Hemshan Machinery provides a detailed overview of the production process of aerated concrete equipment:
1. **Raw Material Storage and Preparation**
Fly ash (or sand) is stored in designated areas, while cement is transported to the on-site warehouse. Chemicals and aluminum powder are kept separately in chemical and aluminum powder storage facilities. These materials are then moved to the production workshop as needed.
2. **Raw Material Processing**
The raw materials are fed into the ball mill via vibrating feeders and belt conveyors. The ground materials are then stored in slurry tanks. Lime is crushed using a jaw crusher and transported to the lime storage bin via a bucket elevator. It is then sent to the ball mill through a screw conveyor. The processed material is further transferred to the powder batching bin. Chemicals are manually measured and mixed into a solution of specific concentration before being stored for later use.
3. **Mixing and Pouring**
Fly ash (or sand, stone powder), along with waste slurry, is measured and placed into the metering cylinder. Once all materials are properly measured and the molds are in place, the mixture is stirred. The slurry must meet the required temperature (around 40°C) before pouring. If the temperature is insufficient, steam heating can be used. Aluminum powder suspension is added just before the pouring process begins.
4. **Curing, Cutting, and Demolding**
After pouring, the blocks are moved to the pre-curing room for initial setting at a controlled temperature (50–70°C) for 1.5 to 2 hours. Then, the mold frame and blank are separated using a spreader. The blocks are cut and split using a gas block cutter. The mold frames are cleaned and prepared for the next batch. The cut blocks are loaded onto trolleys and transported to the autoclave for further processing.
5. **Autoclaving and Final Product**
The blanks are lifted into the autoclave, where they undergo vacuum heating, pressure treatment, and cooling. After this process, the final product is ready for use.
While the overall production process may seem straightforward, each step requires precision and expertise. Even small errors in material ratios or mixing procedures can significantly affect the quality of the final product. For those interested in investing in aerated concrete blocks, visiting Shanghai Hemshan Machinery is highly recommended. Contact them directly for more information, or call their 24-hour free hotline. You can also visit their official website at [http://example.com](http://example.com) for more details.
For more insights and updates, check out our latest article: [Shanghai Aerated Concrete Block Equipment Manufacturers Give Investment Friends a Detailed Explanation of Their Product Line Process](http://news.chinawj.com.cn).
A Workstation sink is a sink with a mechanism built in to the front and back sides of the bowl to allow accessories to sit on the step or ledge, affording the user to prepare meals on the sink instead of on the countertop. The intent behind the design is to speed up the process of food preparation and clean-up.
Workstation mltifunctional production table.Â
1.2/1.5mm stainless steel ledge Kitchen Sink. Space saving and easy to use. Use colander, cutting board, and other accessories for collection.