What is the element that forms the appearance of the bearing workpiece?
Gasoline Grass Cutter,Petrol Brush Cutter Machine,Gas powered brush cutter with saw blade AWLOP CO.,LTD , https://www.awlop.com
September 12 20:01:00, 2025
**What Element Contributes to the Appearance of a Bearing Workpiece? "Surface Roughness is Unqualified"**
Home > Bearing Knowledge > What is the Element that Forms the Bearing Workpiece Appearance? “Roughness is Unqualifiedâ€
---
**What Element Contributes to the Appearance of a Bearing Workpiece?**
When it comes to the appearance of a bearing workpiece, surface roughness plays a crucial role. It directly affects the quality, performance, and lifespan of the bearing. However, during the grinding and super-finishing processes, several factors can lead to unqualified surface roughness.
Some common causes include:
1. **Poor-quality or dull diamond dresser**: If the diamond used for dressing the grinding wheel is not sharp or of low quality, it can result in uneven surface finishes.
2. **Insufficient super-finishing time**: Not allowing enough time for the final finishing process can leave the surface rough or inconsistent.
3. **Low-quality kerosene for super-finishing**: Using poor-quality lubricants can affect the effectiveness of the process.
4. **Incorrect grinding speed and feed rate**: Too slow a grinding speed or too fast a feed rate may lead to an uneven surface.
5. **Improper oil stone quality or alignment**: A substandard oil stone or incorrect device orientation can cause surface imperfections.
6. **Excessive workpiece speed or vibration**: High workpiece speed or misalignment between the workpiece and grinding wheel axes can result in irregularities.
7. **Fast dressing speed or large gap in the dressing structure**: This can affect the uniformity of the grinding wheel surface.
8. **Incorrect grain size or hardness of the grinding wheel**: Using a wheel with too coarse or too soft grains can lead to poor surface finish.
To ensure high-quality bearings, it's essential to monitor and control these factors throughout the manufacturing process.
---
**Related Bearing Knowledge:**
- Characteristics of Polymer Oil Bearings
- SKF Bearing Manufacturing Process Advancements
- Conditions for Achieving Extremely High Speeds in Rolling Bearings
- Detailed Methods for Device Assembly and Adjustment in High-Speed Bearings
- Quality Requirements and Shortcomings of Bearing Steel (Part 3)
---
**Source:** China Bearing Network | Date: December 18, 2013
**Link to this article:** [http://](http://)
**Please cite:** China Bearing Network – [http://](http://)
---
**Previous Article:** The Reason for the Failure of Sliding Bearings (2)
**Next Article:** Technical Standards for Centrifugal Pump Bearings
---
By understanding the key elements that influence the appearance of a bearing workpiece, manufacturers can improve their production quality and ensure long-lasting performance. Surface roughness is more than just a technical specification—it’s a critical factor that impacts the entire functionality of the bearing.