Fluorine plastic magnetic pump is the application of modern magnetism principle, the use of permanent magnet magnetic torque transmission to achieve a new type of non-contact transmission. At present, there are many kinds of fluorine plastic magnetic pump in our country, such as CQB fluorine plastic magnetic pump, ZMD fluorine plastic self-priming magnetic pump, etc. The following Xiaobian to a brief overview of fluorine plastic magnetic pump. At present, the domestic fluorine plastic magnetic pump mainly include: CQB fluorine plastic magnetic pump, ZMD fluorine plastic self-priming magnetic pump, IMD fluorine plastic magnetic drive pump. Fluorine plastic magnetic pump is widely used in chemical, acid, alkali, smelting, rare earth, pesticides, dyes, pharmaceuticals, papermaking, electroplating, electrolysis, pickling, radio, foil, research institutes, defense industry and other industries at any concentration Acid, Alkaline, Oil, Rare and Valuable Liquid, Toxic Liquid, Volatile Chemical Medium. In particular, easy to leak, flammable, explosive liquid transport. The design of the fluorine plastic magnetic pump not only has the advantages of compact structure, beautiful appearance, small volume, low noise and reliable operation of the ordinary magnetic pump, but also all the overcurrent components adopt the best "plastic king" (Fluoroplastics), the isolation sleeve made of special materials, with high mechanical strength, eliminating the magnetic eddy current phenomenon of the ordinary magnetic pump. Therefore, fluorine plastic magnetic pump can deliver any concentration (strong) acid, alkali, oxidants and other corrosive media without any damage. It is mainly composed of pump, magnetic actuator, motor three parts. The key components of the magnetic actuator consists of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation cover. Fluorine plastic magnetic pump works are driven by the motor outside the magnetic rotor rotation, the magnetic field can penetrate the air gap and non-magnetic material, driven impeller connected with the inner rotor for synchronous rotation, to achieve power contactless transmission, the dynamic seal into Static seal. As the pump shaft, the inner rotor is completely closed by the pump body and the isolation sleeve, thus completely solving the problems of running, running, dripping and leakage, and eliminating the leakage of flammable, explosive, toxic and harmful media through the pump seal in the refining and chemical industry Of the security risks, effectively guarantee the physical and mental health and safety of workers. The above is a brief introduction of fluorine plastic magnetic pump which includes, advantages, working principle, through these introduction, I believe in your heart already had the concept of fluorine plastic magnetic pump, and hope to help you follow up better understanding and Use fluoroplastic magnetic pump. Further reading: IFAT China Guangzhou exhibition industry leaders building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: lindj (QQ / WeChat:) Starting: http://beng.liuti.cn/ (Service Hotline:)
1.Application : For Optical And Digital Series
2.Dimension: Customized dimension, OEM & ODM
3.Material: A6063, A6061, A3003 and other series alu alloy
4.Suface treatment: Anodizing, polishing, turning ,power coating, mill finish etc
5.Equipment: CNC ,extruding machine, cold drawn machine, heating oven, straightening machine, cutting machine
|
OD
|
OD Tolerance
|
ID
Tolerance
|
Roundness
|
Straightness
|
Circular
run-out
|
|
φ16-20
|
±0.02
|
±0.02
|
0.01↓
|
0.015↓
|
0.05↓
|
|
φ20-30
|
±0.02
|
±0.02
|
0.01↓
|
0.015↓
|
0.05↓
|
|
φ30-50
|
±0.05
|
±0.05
|
0.02↓
|
0.020↓
|
0.08↓
|
|
φ50-80
|
±0.15
|
±0.10
|
0.05↓
|
0.025↓
|
0.10↓
|
6. STANDARD PACKING:Wooden case/carton
7. Trade Terms
1. Payment: 30% T/T in advance, 70% balance pay before delivery. L/C at sight.
2. Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.
3. Trade Term can be chosen depending on your requirements.
4. FOB Port: Shanghai
Extrusion Tube For Optical And Digital Series
Extrusion Tube For Optical And Digital Series,Aluminum Extrusion Tube For Optical,Aluminum Extrusion Tube For Digital,Optical And Digital Extrusion Tube
Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com