As a pillar industry of Nan'an, the contribution of stone to Nan'an taxation can be said to occupy half of the country. However, how to urge enterprises to improve the output rate of the stone industry and energy efficiency is also a matter that the relevant government departments and industry associations have been working hard to do. In 2017, the Quanzhou Municipal Finance Bureau and the Quanzhou Economic and Information Technology Commission jointly issued a notice on the organization of the 2017 municipal-level energy-saving circular economy special fund award project, and many stone enterprises that took the lead in implementing energy conservation and emission reduction were actively declared. It was learned that the energy-saving technological transformation projects applied by Shuitou Kangli Stone and Gaoli Stone both received tens of thousands of subsidies for subsidies, and Honggao Shifen received subsidies for recycling of circular economy projects, becoming the most direct beneficiary of “green productionâ€.
3 stone enterprises won the “green allowance†In the declaration of this special fund award project, nearly 10 stone enterprises declared. But in the end only three were eligible and received a grant. It is understood that this application project mainly focuses on four aspects: energy-saving technological transformation, energy-saving demonstration, circular economy and capacity building. From the perspective of these four aspects, many companies are satisfied. But look further down, there are 7 hardware indicators, as long as one is not met, you can not get funding subsidies. According to reports, the annual energy saving of energy-saving renovation projects should be above 300 tons of standard coal (including 300 tons) or power consumption of 800,000 kilowatt hours (including 800,000 yuan), and the amount of investment in circular economy projects (except for water-saving enterprises) Must be more than 1 million yuan (including 1 million yuan) to get the initial subsidy. “In the stone industry, there are fewer standards in line with this. The stone industry is mostly small and micro enterprises. There are only a handful of enterprises to reach this energy-saving scale.†Wu Hong, head of the enterprise office of Shuitou Town, said. In a form of the Kangli Stone Show that received the subsidy, the reporter saw that the energy saving of Conley last year was 324.39 tons, only more than 200,000 yuan more than the prescribed starting point. In order to do energy-saving technology reform projects, the investment is as high as more than 5 million yuan. ▲ Kangli stone energy-saving technical transformation project Kang Ya stone administrative person in charge Huang Yabin told reporters that Conley's project selected this time is a sand saw to change the multi-strand wire saw machine. The multi-strand wire saw is a technological innovation product based on the sand saw. Compared with the sand saw, the multi-strand wire saw has low environmental pollution and obvious energy saving and emission reduction effects. In the past, sand saws were mixed with steel sand to complete the cutting of granite blocks. The amount of cutting material that was completed in 3-4 days can now be completed in more than 10 hours, which greatly saves electricity consumption costs. The Gaoli Stone, which also applied for the energy-saving technical transformation project, also stood out in this declaration and received a subsidy of more than 30,000 yuan. Li Xiaoyu, the person in charge, said frankly that although the scale of Gaoli Stone is not large, it has spared no effort in energy conservation and emission reduction. "Our production equipment has always insisted on the most environmentally friendly." Li Xiaoyu said. In Li Xiaoyu's view, instead of replacing the equipment three or five times, it is better to buy it directly in one step. "Although the government's subsidies are like a drop in the bucket, it is also an encouragement for enterprises."
Many stone enterprises purchased energy-saving and emission-reducing equipment. Although there were only three companies that successfully obtained subsidies in this report, this did not affect Nan'an Stone. The enthusiasm of enterprises to improve the environmental quality of products. It is learned that dozens of large-scale stone enterprises such as Universal, Huahui and Pengxiang are also in the field of environmental protection equipment purchase. Pan Xiaomao, deputy general manager of Huahui Co., Ltd. introduced that in recent years, Huahui has introduced 12 Italian Gaspari marble diamond saws, six sets of automatic large-plate grinding machines and Italian automatic glue drying lines, and created Italian technology. Machining Center. "In the development of the industry to a certain stage, social responsibility must not be ignored." Pan Xiaomao said that as the president unit of the Nan'an Stone Association, Huahui, while developing the enterprise itself, will certainly not forget to improve social and economic benefits. In 2017, Pengxiang Industrial established the Gangshi Business Department, and the equipment introduced was also the most advanced emission reduction equipment in the industry. “In the past, traditional equipment, low recycling rate of wastewater, and the current equipment, granite and quartz powder in wastewater can achieve complete recycling.†In Wang Shaofang, chairman of Pengxiang Industry, energy saving is important, but emission reduction and recycling Utilization is also a top priority. ▲The environmental protection production equipment introduced by Pengxiang Stone Industry has entered the tens of thousands of square meters of production base of Pengxiang Gangshi. Several synthetic synthetic stone production lines are running at full capacity. Several diamond frame saws are sawing the stone. material. Wang Shaofang told us that Peng Xiang is currently renovating the problem of organic gases. He pointed to a block forming machine and said, "We are installing an inhalation port for each gas volatilization port or open part, that is, installing an inhalation port in a place with volatile gas, which can both inhale and Vacuuming, the organic gas is collected into a gas collecting device through a pipeline, and then burned and burned to generate water and carbon dioxide, which are discharged. This is in line with the requirements of environmental protection, and is also beneficial to the health of employees. It is about to be completed. We know that organic gases are produced by our use of organic solvents, and organic gases are an important carrier of smog. We know this hazard." “We must upgrade the traditional equipment to ensure that the government meets the required emission standards. Although this requires a lot of money, from the perspective of environmental protection, we are obliged to make due contributions,†said Wang Shaofang. In recent years, through the investment in technology and equipment, and the government's emphasis on the industry, the Nanan stone industry is actively moving toward the green cycle. Driven by the organization of the Nan'an Stone Association, the stone industry has increased the control of environmental pollution, and the industry has also realized the upgrading and transformation from ordinary raw materials to refined process products, and the resource utilization rate has also been greatly improved.
The environmental protection efficiency of domestic machinery can be compared with foreign countries as the most important supporting material for the stone industry. It is the consensus of every stone machinery enterprise to start energy conservation and emission reduction from the production. Talking about the trend of energy-saving equipment, Cai Jianhua, general manager of Jubang Machinery, bluntly said, "Our equipment has been gradually improved in this respect. This year's Xiamen Exhibition, the permanent magnet frequency conversion synchronous motor exhibited by Jubang is the national push. Key energy-saving projects, energy-saving rate can reach 15% -25%, greatly reducing the cost of electricity consumption. When communicating with customer companies, Cai Jianhua heard the most feedback from customers on the power consumption of the equipment. In Cai Jianhua's view, it is not difficult to understand the customer's thirst for energy-saving equipment. In the future of more and more small profits, stone companies will pay more for each province. "In fact, the performance of many domestic stone machinery is almost comparable to that of foreign countries. The price is much lower than that of the imported machinery." In Cai Jianhua's view, the multi-strand wire saw is currently sold for several million yuan. It will take some time to achieve localization, but it is already a trend. To cut granite slabs, or harder marble slabs, multi-strand wire saws are a good choice. At this year's Xiamen exhibition, companies including Xiaolong and Yangcheng Machinery also played "energy-saving and environmental protection" cards. Yang Chengchun Yang Yinchun told us that in the past, more consideration was given to how to maximize the production capacity of enterprises, but since the beginning of the previous year, energy conservation has also become a major starting point for production. “Now the company not only requires high equipment production efficiency, but also requires less power consumption, which will be the standard for us to develop each product next.â€
Derrick Flc2000 Pwp Shaker Screen
Replacement Screens for Derrick FLC 2000 / 48 × 30 Shale Shakers – PWP
Derrick FLC2000 PWP Shaker Screen,
also famous known as 48-30 screens, are compatible with Derrick FLC
(Flo-Line Cleaner) 2000 series shale shakers. It is a hook strip flat
type Shaker Screen, which is constructed of multiple stainless steel 304
or 316 wire mesh cloth layers. And then bonded to a rectangular or
hexagonal perforated metal plate for added support and facilitation of
repair.
Technical Parameter
-
Material: stainless steel 304/316/316 L.
-
Construction Type: PWP (perforated wear plate).
-
Perforated Mesh Shape: rectangle/hexagon.
-
API RP 13C Designation: API 120 – API 400.
-
Series: DX, DF, HP optional.
-
Color: green.
-
Package: 2 pcs /carton, then packaged in wooden case.
Adaptable Shale Shaker Model
SJ- Derrick fLC2000 PWP shaker screen are used as the substitute screen for
-
Derrick FLC (Flo-Line Cleaner) 2000 3-panel shaker.
-
Derrick FLC (Flo-Line Cleaner) 2000 4-panel shaker.
-
Derrick 48-30 shale shaker.
-
Derrick FLC (Flo-Line Cleaner) 2000 series mud cleaners.
-
Derrick FLC Plus, FLC with AWD, HI-G dryer.
Competitive Advantage
-
Manufactured according to the API RP 13C (ISO 13501).
-
Top quality stainless steel wire mesh for longevity.
-
Increase shaker capacity and reduce mud loss.
-
Scientific & reasonable cost control system for competitive price.
-
Higher flow rates without sacrificing cut point integrity.
-
Adequate inventory in the shortest time to meet customers' demand.
Remarks:
Derrick, FLC 2000, PWP, DX, DF, HP are marks of Derrick Corporation.
ShengJia only produces the replacement screens but not original from Derrick
Derrick FLC2000 PWP Shaker Screen
Derrick Flc2000 Pwp Shaker Screen,Derrick Flc2000 Shaker Screen,Derrick Flc2000 Shale Shaker Screen,Derrick Flc2000 Pwp Shale Shaker Screen
Anping Shengjia Hardware Mesh Co.,ltd , https://www.oilshakerscreen.com